Honda 750 AER0 Instructions
1. Remove Seat assembly
2. Separate the two seats removing two bolts do this very carefully and slowly
3. Place supplied bracket between seats and reinstall bolts
4. Put seat back on( it will be tight at first)
5. Install new backrest in the bracket and ride safe!
Need both seats, driver and passenger seat to install. Due to the size of the stock bolts, need to remove passenger seat strip. I covered all metal parts the come in contact with seat to prevent rubbing the two seats. Be very careful when removing the passenger seat attachment bolts, they strip easily. I added lock tight when reinstall. The instruction sheet that came with the back rest was short and sample. When putting the backbrace attachment bracket to the seat mounting bolt, you will figure out that it only goes on in one direction. The backrest is not adjustable. You may need to modify to raise or tilt the back rest to fit your size. I would gave it 5 stars if I could adjust up or down. The rest should be longer metal and pad move with a lock nut to give it better adjustment.